Int 15/AH=21h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

SYSTEM - POWER-ON SELF-TEST ERROR LOG (PS50+)

AH = 21h
AL = subfunction
00h read POST log
01h write POST log
BH = device ID
BL = error code

Return:
CF clear if successful CF set on error AH = status 00h OK 01h list full 02h unsupported subfunction 80h invalid command 86h unsupported function if function 00h: BX = number of error codes stored ES:DI -> error log

Notes: The log is a series of words, the first byte of which identifies the error code and the second the device.. Supported by AMI PCI BIOS. IBM considers this a required BIOS function. If the device ID is FFh, the "error code" is the actual device number minus 255 (thus these devices have no specific error codes)

See Also: AH=23h"SYSTEM" - AH=24h"SYSTEM"

Category: Bios - Int 15h - S

rbline.gif

lup.gif ldown.gif Interrups Categories Contents