Int 15/AX=E902h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

PhysTechSoft PTS ROM-DOS - SET DIAGNOSTIC DOS ERROR FLAG

AX = E902h
CX = diagnostic flag mask (see #04091,#04092)

Return:
Nothing

Note: Provided by PhysTechSoft's PTS ROM-DOS and displayed by SETUP.COM. DOS error flags can be assigned by application software.

See Also: AX=E901h - INT 14/AH=05h"PTS ROM-DOS" - INT 14/AH=06h"PTS ROM-DOS"

Bitfields for PhysTechSoft PTS ROM-DOS BIOS error flags: Bit(s) Description (Table 04091) ??? Processor test failed.. Stack test failed.. BIOS code damaged.. Conventional memory test failed.. SRAM test failed.. EMS test failed.. Boot-sector damaged.. Boot-sector read error.. Loader setup damaged.. BIOS setup damaged.

See Also: #04092 - #04093

Bitfields for PhysTechSoft PTS ROM-DOS LOADER error flags:: Bit(s) Description (Table 04092) ??? Processor test failed.. Loader code damaged.. Loader code in RAM damaged.. Loader setup in flash-memory damaged.. BIOS setup in flash-memory damaged.. BIOS offset in flash-memory field damaged.. BIOS size in flash-memory field damaged.. BIOS in flash-memory damaged.. BIOS in ROM damaged.. Last operation field damaged.. Channel error.. Setup in flash-memory damaged.. Loading BIOS from control channel failed.. Loading DOS from control channel failed.

See Also: #04091

Category: Uncatagorized - Int 15h - P

rbline.gif

lup.gif ldown.gif Interrups Categories Contents