Int 1A/AX=B10Ah/SF=1004h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

PCI BIOS v2.0c+ - READ CONFIGURATION DWORD (VLSI devices)

AX = B10Ah subfn 1004h
BH = bus number
BL = device/function number (bits 7-3 device, bits 2-0 function)
DI = register number (0000h-00FFh) (see #00878)

Return:
CF clear if successful ECX = dword read CF set on error AH = status (00h,87h) (see #00729) EAX, EBX, ECX, and EDX may be modified all other flags (except IF) may be modified

Notes: This function may require up to 1024 byte of stack; it will not enable interrupts if they were disabled before making the call. The meanings of BL and BH on entry were exchanged between the initial drafts of the specification and final implementation

See Also: AX=B10Ah - AX=B10Ah/SF=8086h

Format of PCI Configuration Data for VLSI VL82C591 Host/PCI bridge: Offset Size Description (Table 00919) 00h 64 BYTEs header (see #00878) (vendor ID 1004h, device ID 0005h) 40h BYTE bus number 41h BYTE subordinate bus number 42h WORD reserved 44h 4 DWORDs reserved 54h 2 BYTEs device-specific configuration registers 56h WORD reserved 58h 2 BYTEs device-specific configuration registers 5Ah WORD reserved 5Ch 5 BYTEs device-specific configuration registers. ... FFh BYTE device-specific configuration register

See Also: #00878 - #00732 - #00920

Format of PCI Configuration data for VLSI VL82C593 PCI/ISA bridge: Offset Size Description (Table 00920) 00h 64 BYTEs header (see #00878) (vendor ID 1004, device ID 0006h) 40h 4 DWORDs reserved 50h 11 BYTEs device-specific configuration registers 5Bh BYTE reserved 5Ch 25 BYTEs device-specific configuration registers 75h 138 BYTEs reserved FFh BYTE device-specific configuration register

See Also: #00878 - #00919

Category: Expansion Bus Bios - Int 1Ah - P

rbline.gif

lup.gif ldown.gif Interrups Categories Contents