Int 2F/AX=CB01h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Communicating Applications Specification - SUBMIT A TASK

AX = CB01h
DS:DX -> ASCIZ name of task control file

Return:
AX >= 0: event handle.

AX < 0:
Two's complement of error code (see #03048)

Note: Files needed for an event must be kept until task is complete or error

See Also: AX=CB0Bh - AX=CB15h

(Table 03048) Values for CAS error code: (AH = class, AL = subcode, value passed back is 2's complement) Class 00h --- FAX warnings. Subcode 00h no error 02h bad scanline count 03h page sent with errors, could not retransmit 04h received data lost 05h invalid or missing logo file 06h filename does not match nonstandard format (NSF) header 07h file size does not match NSF header Class 01h --- DOS warnings (data was sent). Subcode 01h invalid function 05h access denied 06h invalid handle others see #01680 at INT 21/AH=59h/BX=0000h Class 02h --- fatal errors (data not sent). Subcode 00h multiplex handler failed 01h unknown command 02h bad event handle 03h FIND NEXT attempted before FIND FIRST 04h no more events 07h invalid queue type 08h bad control file 09h communication board busy 0Ah invalid command parameter 0Bh can't uninstall resident code 0Ch file exists 80h unknown task type 81h bad phone number 82h bad .PCX file header 83h unexpected EOF 84h unexpected disconnect 85h too many dialing retries 86h no file specified for send 87h communication board timeout 88h received too many pages (>1023) of data 89h manual connect initiated too long ago 8Ah hardware command set error 8Bh bad NonStandard Format (NSF) header file Class 03h --- fatal DOS errors. Subcode 02h file not found 03h path not found others see #01680 at INT 21/AH=59h/BX=0000h Class 04h --- FAX errors. Subcode 01h remote unit not Group 3 compatible 02h remote unit did not send capabilities 03h other FAX machine incompatible 04h other FAX incapable of file transfers 05h exceeded retrain or FAX resend limit 06h line noise or failure to agree on bit rate 07h remote disconnected after receiving data 08h no response from remote after sending data 09h remote's capabilities incompatible 0Ah no dial tone (v1.2+) 0Bh invalid response from remote unit after sending data 0Dh phone line dead or remote unit disconnected 0Eh timeout while waiting for secondary dial tone (v1.2+) 11h invalid command from remote after receiving data 15h tried to receive from incompatible hardware 5Ch received data overflowed input buffer 5Dh remote unexpectedly stopped sending data 5Eh other FAX machine jammed (no data sent) 5Fh remote took too long to send fax scan line 63h can't get through to remote unit 64h user canceled event Class 05h --- application-specific (v1.2+) ---Intel FAXPOP.EXE. Subcode 00h tried to send while in graphics mode 01h insufficient disk space 02h internal buffer overflow Class 06h --- CAS implementation-specific (v1.2+)

Category: Fax - Int 2Fh - C

rbline.gif

lup.gif ldown.gif Interrups Categories Contents