Int 31/AX=0008h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

DPMI 0.9+ - SET SEGMENT LIMIT

AX = 0008h
BX = selector
CX:DX = segment limit

Return:
CF clear if successful CF set on error AX = error code (DPMI 1.0+) (8021h,8022h,8025h) (see #03143)

Notes: CX must be zero for 16-bit DPMI implementations. Limits greater than 1MB must be page aligned (low 12 bits set). Only modify descriptors allocated with INT 31/AX=0000h. DPMI 1.0+ automatically reloads any segment registers containing the selector being modified. Not supported by MS Windows 3.0 in Standard mode

See Also: AX=0007h - AX=0009h - AX=000Ch - INT 21/AX=3505

See Also: INT 2C/AX=0003h - #00501 at INT 15/AH=89h

Category: DOS Extenders - Int 31h - D

rbline.gif

lup.gif ldown.gif Interrups Categories Contents