|
| Interrups | Categories | Contents |
AH = 15h
Return:
AH = SCSI status byte CF clear if successful AL = SCSI message byte CF set on error AL = error code (see #03786)
Note: If AH=06h was previously called to set the early return mode, this function finishes a command AH=13h or AH=14h which returned before the last DMA transfer was finished
See Also: AH=06h - AH=13h - AH=14h
Category: Disk I/O Enhancements - Int 78h - T
|
| Interrups | Categories | Contents |