Int 15/AX=5307h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Advanced Power Management v1.0+ - SET POWER STATE

AX = 5307h
BX = device ID (see #00474)
CX = system state ID (see #00475)

Return:
CF clear if successful CF set on error AH = error code (01h,03h,09h,0Ah,0Bh,60h) (see #00473)

Note: Should not be called from within a hardware interrupt handler to avoid reentrance problems

See Also: AX=530Ch

(Table 00474) Values for APM device IDs: 0000h system BIOS 0001h all devices for which the system BIOS manages power 01xxh display (01FFh for all attached display devices) 02xxh secondary storage (02FFh for all attached secondary storage devices) 03xxh parallel ports (03FFh for all attached parallel ports) 04xxh serial ports (04FFh for all attached serial ports) ---APM v1.1+ --- 05xxh network adapters (05FFh for all attached network adapters) 06xxh PCMCIA sockets (06FFh for all) 0700h-7FFFh reserved 80xxh system battery devices (APM v1.2) 8100h-DFFFh reserved Exxxh OEM-defined power device IDs F000h-FFFFh reserved

(Table 00475) Values for system state ID: 0000h ready (not supported for device ID 0001h) 0001h stand-by 0002h suspend 0003h off (not supported for device ID 0001h in APM v1.0) ---APM v1.1--- 0004h last request processing notification (only for device ID 0001h) 0005h last request rejected (only for device ID 0001h) 0006h-001Fh reserved system states 0020h-003Fh OEM-defined system states 0040h-007Fh OEM-defined device states 0080h-FFFFh reserved device states

Category: Power Management - Int 15h - A

rbline.gif

lup.gif ldown.gif Interrups Categories Contents