Int 21/AH=E3h/SF=D7h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Novell NetWare - FILE SERVER - GET DRIVE MAPPING TABLE

AH = E3h subfn D7h
DS:SI -> request buffer (see #02033)
ES:DI -> reply buffer (see #02034)

Return:
AL = status (00h,C6h) (see #02025)

Notes: This function is supported by Advanced NetWare 2.1+. The calling workstation must have console operator privileges

See Also: AH=E3h/SF=C8h - AH=E3h/SF=D6h - AH=E3h/SF=D9h -

See Also: AX=F217h/SF=D7h

Format of NetWare "Get Drive Mapping Table" request buffer: Offset Size Description (Table 02033) 00h WORD 0001h (length of following data) 02h BYTE D7h (subfunction "Get Drive Mapping Table")

See Also: #02034 - #02230 at AX=F217h/SF=D7h

Format of NetWare "Get Drive Mapping Table" reply buffer: Offset Size Description (Table 02034) 00h WORD (call) 00ECh (length of following results buffer) 02h DWORD (big-endian) clock tick elapsed since system started 06h BYTE fault tolerance (SFT) level 07h BYTE number of logical drives attached to server 08h BYTE number of physical drives attached to server 09h 5 BYTEs disk channel types (00h none, 01h XT, 02h AT, 03h SCSI, 04h disk coprocessor drive, 32h-FFh value-added drive types) 0Eh WORD (big-endian) number of outstanding controller commands 10h 32 BYTEs drive mapping table (FFh = no such drive) 30h 32 BYTEs drive mirror table (secondary physical drive, FFh = none) 50h 32 BYTEs dead mirror table (last drive mapped to, FFh if never mirrored) 70h BYTE physical drive being remirrored (FFh = none) 71h BYTE reserved 72h DWORD (big-endian) remirrored block 76h 60 BYTEs SFT error table (internal error counters)

See Also: #02033 - #02230 at AX=F217h/SF=D7h

Category: Netware - Int 21h - N

rbline.gif

lup.gif ldown.gif Interrups Categories Contents