Int 2F/AX=AC1Ah/DI=1092h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

QRIP/TSR - GET RIP_ENTER_BLOCK_MODE INFORMATION

AX = AC1Ah
DI = 1092h

Return:
AH = requested protocol (see #02968) AL = file type (see #02969) DX:BX -> ASCIZ filename or 0000h:0000h CX = length of filename

Note: If DI <> 1092h on entry, QRIP chains the call

See Also: AX=ACF0h

(Table 02968) Values for QRIP protocol identifier: 00h Xmodem (checksum) 01h Xmodem-CRC 02h Xmodem-1K 03h Xmodem-1K-G 04h Kermit 05h Ymodem 06h Ymodem-G 07h Zmodem with crash recovery 08h-0Fh same as 00h-07h, but for uploading instead of downloading

See Also: #02969

(Table 02969) Values for QRIP file type: 00h RIP file sequence to be displayed 01h RIP file sequence to be stored in icon directory 02h ICN file sequence to be stored in icon directory 03h HLP file sequence to be stored, then auto-loaded if needed 04h COMPOSITE DYNAMIC file sequence (batch protocols only) 05h ACTIVE DYNAMIC file sequence (batch protocols only)

Note: For file types 04h and 05h, any .RIP or .ICN files are stored in the icon directory; in mode 05h, any .RIP files are also played back as they are received

See Also: #02968

Category: Video - Int 2Fh - Q

rbline.gif

lup.gif ldown.gif Interrups Categories Contents