Int 2F/AX=C000h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Novell NetWare Connect NETWARN - INSTALLATION CHECK

AX = C000h

Return:
AL = FFh if installed SI = segment of resident portion

Program: NETWARN is a utility supplied with NetWare Connect to warn a remote dialup user when programs are about to be loaded slowly over the modem link.

Range:
AH=C0h to AH=FFh, selected by scanning for first free multiplex number

Note: On return, verify that it is NETWARN responding by examining signature at in NETWARN's data table in the resident segment (see #03027)

See Also: AX=C000h"ODI" - AX=C000h"NESL"

Format of NETWARN Configuration structure: Offset Size Description (Table 03027) 103h 7 BYTEs signature string "NETWARN" 10Ah BYTE major version in ASCII (="1") 10Bh BYTE minor version in ASCII (="0") 10Ch DWORD minimum size of EXE cared about in bytes (/S=xxxx) 110h WORD same value in kilobytes (see #03028 [bit 4]) 112h BYTE multiplex code (AH value) actually being used 113h WORD options (see #03028) 115h DWORD INT 21h vector before NETWARN loaded 119h DWORD INT 2Fh vector before NETWARN loaded 11Dh 16 BYTEs ASCIIZ local name of last device which was checked 12Dh 128 BYTEs ASCIIZ remote name of last device which was checked

Note: The specified offsets are from the start of the resident segment

Bitfields for NETWARN options: Bit(s) Description (Table 03028) 0 ??? (=0) 1 /U (Unload) selected (never in resident) 2 /E (Enabled) Will trap & check EXEC's 3 /D (Disabled) No EXEC checking done 4 /S (Size) was set (see #03027 [offsets 010Ch and 0110h]) 5 /P (Path shown) 6 /H or /? (Help) (never in resident)

See Also: #03027

Category: Netware - Int 2Fh - N

rbline.gif

lup.gif ldown.gif Interrups Categories Contents