Int 4F/AX=8100h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Common Access Method SCSI interface rev 2.3 - SEND CCB TO XPT/SIM

AX = 8100h
ES:BX -> CAM Control Block (CCB) (see #03229)

Return:
AH = status 00h successful 01h invalid CCB address (0000h:0000h)

Note: The SCSI Interface Module (SIM) may complete the requested function and invoke the completion callback function before this call returns

See Also: AX=8200h - INT 2F/AX=7F01h - INT 4B"Common Access Method"

(Table 03228) Values for CAM function code: 00h NOP 01h execute SCSI I/O 02h get device type 03h path inquiry 04h release SIM queue 05h set async callback 06h set device type 07h-0Fh reserved 10h abort SCSI command 11h reset SCSI bus 12h reset SCSI device 13h terminate I/O process 14h-1Fh reserved 20h engine inquiry 21h execute engine request 22h-2Fh reserved 30h enable logical unit number 31h execute target I/O 32h-7Fh reserved 80h-FFh vendor-specific functions

Format of CAM Control Block: Offset Size Description (Table 03229) 00h DWORD physical address of this CCB 04h WORD CAM control block length 06h BYTE function code (see #03228) 07h BYTE CAM status (see #03232) 08h BYTE SCSI status 09h BYTE path ID (FFh = XPT) 0Ah BYTE target ID 0Bh BYTE logical unit number 0Ch WORD CAM flags (see #03230) 0Eh BYTE CAM address flags (see #03231) 0Fh BYTE target-mode flags (see #03233) ---function 02h--- 10h DWORD pointer to 36-byte buffer for inquiry data or 0000h:0000h 14h BYTE peripheral device type of target logical unit number ---function 03h--- 10h BYTE version number (00h-07h prior to rev 1.7, 08h = rev 1.7, 09h-FFh = rev no, i.e. 23h = rev 2.3) 11h BYTE SCSI capabilities (see #03234) 12h BYTE target mode support

bit 7:
Processor mode

bit 6:
Phase-cognizant mode

bit 5-0:
Reserved 13h BYTE miscellaneous flags

bit 7:
Scanned high to low instead of low to high

bit 6:
Removables not included in scan

bit 5:
Inquiry data not kept by XPT

bits 4-0:
Reserved 14h WORD engine count 16h 14 BYTEs vendor-specific data 24h DWORD size of private data area 28h DWORD asynchronous event capabilities (see #03235) 2Ch BYTE highest path ID assigned 2Dh BYTE SCSI device ID of initiator 2Eh 2 BYTEs reserved 30h 16 BYTEs SIM vendor ID 40h 16 BYTEs HBA (host bus adaptor) vendor ID 50h 4 BYTEs operating-system dependant usage ---functions 00h,04h,11h,12h--- no additional fields ---function 05h--- 10h DWORD asynchronous event enables (refer to function 03h above) 14h DWORD pointer to asynchronous callback routine (see #03241) 18h DWORD pointer to peripheral driver buffer 1Ch BYTE size of peripheral buffer ---function 06h--- 10h BYTE peripheral device type of target ---functions 10h,13h--- 10h DWORD pointer to CCB to be aborted ---function 20h--- 10h WORD engine number 12h BYTE engine type 00h buffer memory 01h lossless compression 02h lossy compression 03h encryption 13h BYTE engine algorithm ID 00h vendor-unique 01h LZ1 variation 1 (STAC) 02h LZ2 variation 1 (HP DCZL) 03h LZ2 variation 2 (Infochip) 14h DWORD engine memory size ---function 21h--- 10h DWORD pointer to peripheral driver 14h 4 BYTEs reserved 18h DWORD OS-dependent request-mapping info 1Ch DWORD address of completion callback routine 20h DWORD pointer to scatter/gather list or data buffer 24h DWORD length of data transfer 28h DWORD pointer to engine buffer data 2Ch 2 BYTEs reserved 2Eh WORD number of scatter/gather entries 30h DWORD maximum destination data length 34h DWORD length of destination data 38h DWORD source residual length 3Ch 12 BYTEs reserved 48h DWORD OS-dependent timeout value 4Ch 4 BYTEs reserved 50h WORD engine number 52h WORD vendor-unique flags 54h 4 BYTEs reserved 58h N BYTEs private data area for SIM ---function 30h--- 10h WORD group 6 vendor-unique CDB length 12h WORD group 7 vendor-unique CDB length 14h DWORD pointer to target CCB list 18h WORD number of target CCBs ---other functions--- 10h DWORD pointer to peripheral driver 14h DWORD pointer to next CCB 18h DWORD OS-dependent request mapping information 1Ch DWORD address of completion callback routine (see #03240) 20h DWORD pointer to scatter/gather list or data buffer 24h DWORD length of data transfer 28h DWORD pointer to sense info buffer 2Ch BYTE length of sense info buffer 2Dh BYTE CDB length 2Eh WORD number of scatter/gather entries scatter/gather list is array of 2N DWORDs, each pair specifying the address and length of a data block 30h 4 BYTEs vendor-specific data 34h BYTE (ret) SCSI status 35h BYTE (ret) auto-sense residual length 36h 2 BYTEs reserved 38h DWORD (ret) residual length 40h 12 BYTEs Command Descriptor Block (CDB) (see #03236,#03237,#03238) 44h DWORD OS-dependent timeout value 48h DWORD pointer to message buffer 4Ch WORD length of message buffer 4Eh WORD vendor-unique flags 50h BYTE tag queue action 51h 3 BYTEs reserved 54h N BYTEs private data area for SIM

Bitfields for CAM flags: Bit(s) Description (Table 03230) 0 CDB is a pointer 1 tagged queue action enable 2 linked CDB 3 disable callback on completion 4 scatter/gather 5 disable autosense 7-6 direction (00 reserved, 01 in, 10 out, 11 no data transfer) 9-8 reserved 10 engine synchronize 11 SIM queue freeze 12 SIM queue priority. 1 head insertion. 0 tail insertion (normal) 13 disable synchronous transfers \ mutually 14 initiate synchronous transfers / exclusive 15 disable disconnect

Bitfields for CAM address flags: Bit(s) Description (Table 03231) 7 SG list/data (0 = host, 1 = engine)

6 CDB pointer (6-1:
0=virtual addr, 1=phys addr) 5 SG list/data 4 sense buffer 3 message buffer 2 next CCB 1 callback on completion 0 reserved

(Table 03232) Values for CAM status: 00h request in progress 01h request successful 02h host aborted request 03h unable to abort request 04h request completed with error 05h CAM is busy 06h invalid request 07h invalid path ID 08h no such SCSI device 09h unable to terminate I/O process 0Ah timeout on target selection 0Bh timeout on command 0Dh receive message rejection 0Eh sent/received SCSI bus reset 0Fh detected uncorrectable parity error 10h Autosense request failed 11h no HBA detected 12h data over/underrun 13h bus freed unexpectedly 14h target bus phase sequence failure 15h CCB too small 16h requested capability not available 17h sent bus device reset 18h terminate I/O process 38h invalid LUN 39h invalid target ID 3Ah unimplemented function 3Bh nexus not established 3Ch invalid initiator ID 3Dh received SCSI Command Descriptor Block 3Eh LUN already enabled 3Fh SCSI bus busy

Note: Bit 6 set to indicate frozen SIM queue. Bit 7 set to indicate valid autosense

Bitfields for CAM target-mode flags: Bit(s) Description (Table 03233) 7 data buffer valid 6 status valid 5 message buffer valid 4 reserved 3 phase-cognizant mode 2 target CCB available 1 disable autodisconnect 0 disable autosave/restore

Bitfields for SCSI capabilities: Bit(s) Description (Table 03234) 7 modify data pointers 6 wide bus (32 bits) 5 wide bus (16 bits) 4 synchronous transfers 3 linked commands 2 reserved 1 tagged queueing 0 soft reset

Bitfields for CAM asynchronous event capabilities: Bit(s) Description (Table 03235) 31-24 vendor-specific 23-8 reserved 7 new devices found during rescan 6 SIM module deregistered 5 SIM module registered 4 sent bus device reset to target 3 SCSI AEN 2 reserved 1 unsolicited reselection 0 unsolicited SCSI bus reset

Format of Six-Byte SCSI Command Descriptor Block (CDB): Offset Size Description (Table 03236) 00h BYTE operation code (see #03239) 01h BYTE logical unit number (bits 7-5), SCSI-1/SCSI-2 MSB of logical block address (bits 4-0) 02h WORD logical block address (low word) 04h BYTE transfer length 05h BYTE control byte

See Also: #03237 - #03238

Format of Ten-Byte SCSI Command Descriptor Block (CDB): Offset Size Description (Table 03237) 00h BYTE operation code (see #03239) 01h BYTE logical unit number (bits 7-5), SCSI-1/SCSI-2 reserved in SCSI-3 02h DWORD logical block address (low word) 06h BYTE reserved 07h WORD transfer length 09h BYTE control byte

See Also: #03236 - #03238

Format of Twelve-Byte SCSI Command Descriptor Block (CDB): Offset Size Description (Table 03238) 00h BYTE operation code (see #03239) 01h BYTE logical unit number (bits 7-5), SCSI-1/SCSI-2 reserved in SCSI-3 02h DWORD logical block address (low word) 06h DWORD transfer length 0Ah BYTE reserved 0Bh BYTE control byte

See Also: #03236 - #03237

(Table 03239) Values for SCSI CDB operation code for direct-access devices: 00h Test Unit Ready 01h Rezero Unit 03h Request Sense 04h Format Unit 07h Reassign Blocks 08h Read (6-byte CDB) 0Ah Write (6-byte CDB) 0Bh Seek (6-byte CDB) 12h Inquiry 15h Mode Select (6-byte CDB) 16h Reserve 17h Release 18h Copy 1Ah Mode Sense (6-byte CDB) 1Bh Start/Stop Unit 1Ch Receive Diagnostic Results 1Dh Send Diagnostic 1Eh Prevent/Allow Medium Removal 25h Read Capacity 28h Read (10-byte CDB) 2Ah Write (10-byte CDB) 2Bh Seek (10-byte CDB) 2Eh Write and Verify 2Fh Verify 30h Search Data High 31h Search Data Equal 32h Search Data Low 33h Set Limits 34h Prefetch 35h Synchronize Cache 36h Lock/Unlock Cache 37h Read Defect Data 39h Compare 3Ah Copy and Verify 3Bh Write Buffer 3Ch Read Buffer 3Eh Read Long 3Fh Write Long 40h Change Definition 41h Write Same 4Ch Log Select 4Dh Log Sense 55h Mode Select (10-byte CDB) 5Ah Mode Sense (10-byte CDB)

See Also: #03236 - #03237 - #03238

(Table 03240) Values completion callback function is called with:. Interrupts disabled. ES:BX -> completed CCB

(Table 03241) Values asynchronous callback function is called with:. AH = opcode. AL = path ID generating callback. DH = target ID causing event. DL = LUN causing event. CX = data byte count (if applicable). ES:BX -> data buffer (if applicable)

Return:
All registers preserved

Category: Disk I/O Enhancements - Int 4Fh - C

rbline.gif

lup.gif ldown.gif Interrups Categories Contents