Int 6B/AH=10h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

NPC NCSI EXTENDED SERIAL I/O - GET STATUS

AH = 10h
AL = connection ID (Novell TELAPI.EXE)
CX = ???
ES:BX -> buffer for status (see #03730)

Return:
CF clear if successful CL = ??? CH = ??? CF set on error ???

Notes: This function is also supported by TelAPI. When shelled out to an external protocol from Novell NASI, the circuit whose status indicates that it is connected is the currently active circuit

See Also: AX=0700h - AH=12h - AH=1Fh

Format of NASI status: Offset Size Description (Table 03730) 00h BYTE number of allocated virtual circuits 01h BYTE reserved 02h 9 BYTEs states of emulated circuits 0-8 00h idle 01h attached Telnet session, in command state 02h attached Telnet session, connected with host 03h-06h ??? (not returned by TelAPI)

Note: This description is derived from the Novell TelAPI emulation of NASI

Category: Serial I/O - Int 6Bh - N

rbline.gif

lup.gif ldown.gif Interrups Categories Contents