Int 7A/BX=0010h

lup.gif ldown.gif Interrups Categories Contents

rbline.gif

Novell NetWare - SPX Driver - INSTALLATION CHECK

BX = 0010h
AL = 00h

Return:
AL = status 00h if SPX not installed F0h if IPX not installed FFh if SPX loaded BH = SPX major version BL = SPX minor version CX = maximum SPX connections DX = SPX connections available

Notes: This function is supported by Advanced NetWare 2.1+. This interrupt is used for IPX/SPX access in NetWare versions through 2.0a; in later versions, you should use INT 2F/AX=7A00h to get an entry point even though INT 7A still exists. For both INT 7A and the FAR entry point, BX contains the function number. IPX is sometimes called internally with BX bit 15 set, which causes the entry point handler to bypass some checks and an optional call to the IPX Windows support handler set with INT 2F/AX=7AFFh/BX=0000h (see #02926)

See Also: BX=0015h

Category: Netware - Int 7Ah - N

rbline.gif

lup.gif ldown.gif Interrups Categories Contents